Personal Computer World 2005 October/PCWOCT05.iso/Software/Full/PowerBackUp 1/data1.cab/Enu_File_Group/Error.xml

Extensible Markup Language | 2004-10-26 | 88KB | 1,760 lines

<?xml version="1.0" ?>
<root>
<!-- General -->
    <e80004005>
        <name>E_FAIL</name>
        <title></title><reference></reference>
        <description>An undetermined error occurred.</description>
    </e80004005>
    <e80004001>
        <name>E_NOTIMPL</name>
        <title></title><reference></reference>
        <description>An undetermined error occurred.</description>
    </e80004001>

<!-- Burning Manager -->
    <e60FF0001>
        <name>BURNER_I_STILL_RUNNING</name>
        <title>Burning is still in progress.</title><reference></reference>
        <description>Description:\r\n
(1) The operation is still running.\r\n
(2) Please wait for the burning process to finish before trying again.</description>
    </e60FF0001>
    <e60FF0002>
        <name>BURNER_I_END_OF_FILE</name>
        <title>The end of a file was detected.</title>
        <reference>() The pointer reached the end of a file when Read() was called.\r\n</reference>
        <description>Description:\r\n
(1) An error occurred in the internal structure of the program.\r\n
(2) Try again with different files or folders.\r\n
(3) Try again with a different disc.</description>
    </e60FF0002>
    <eA0FF0001>
        <name>BURNER_E_DRIVE_NOT_READY</name>
        <title>The drive is not ready.</title><reference></reference>
        <description>Description:\r\n
(1) The selected drive is not ready.\r\n
(2) There is no disc in the selected drive.\r\n
(3) Please wait for the drive light to go off, then try again.\r\n
(4) Try again with a different disc.</description>
    </eA0FF0001>
    <eA0FF0002>
        <name>BURNER_E_DRIVE_NOT_EXIST</name>
        <title>The drive could not be found.</title><reference></reference>
        <description>Description:\r\n
(1) The selected drive cannot be located.\r\n
(2) The selected drive is not supported by this program.\r\n
(3) Restart the program, then try again.\r\n
(4) Restart your computer, then try again.</description>
    </eA0FF0002>
    <eA0FF0003>
        <name>BURNER_E_ABORT_WRITING</name>
        <title>Burning was aborted.</title><reference></reference>
        <description>Description:\r\n
(1) The writing operation was aborted.\r\n
(2) The Audio CD ripping operation was aborted.\r\n
(3) The Full Erase operation was aborted.</description>
    </eA0FF0003>
    <eA0FF0004>
        <name>BURNER_E_INVALID_DISC</name>
        <title>The disc is invalid.</title><reference></reference>
        <description>Description:\r\n
(1) The inserted disc is neither blank nor recordable.\r\n
(2) The inserted disc is not erasable.\r\n
(3) The inserted disc is corrupted.\r\n
(4) The inserted disc is blank.\r\n
(5) Make sure the disc is properly placed in the drive tray.\r\n
(6) Try again with a different disc.\r\n
(7) Erase the disc, then try again.</description>
    </eA0FF0004>
    <eA0FF0005>
        <name>BURNER_E_IMAGE_FILE_NAME</name>
        <title>The image file name is invalid.</title><reference></reference>
        <description>Description:\r\n
(1) The recording image file could not be found.\r\n
(2) The name of the bootable image contains unacceptable characters.\r\n
(3) Verify that the file exists, then try again.\r\n
(4) Try again with a different image file.</description>
    </eA0FF0005>
    <eA0FF0006>
        <name>BURNER_E_NO_DISK_SPACE</name>
        <title>There is no disc space.</title><reference></reference>
        <description>Description:\r\n
(1) Insufficient disk space to store the desired data.\r\n
(2) Try removing some files and folders, then try again.</description>
    </eA0FF0006>
    <eA0FF0007>
        <name>BURNER_E_NOT_BLANK_BUT_ERASABLE</name>
        <title>The disc is erasable but not blank.</title><reference></reference>
        <description>Description:\r\n
(1) The inserted disc is erasable but not blank.\r\n
(2) Erase the disc, then try again.</description>
    </eA0FF0007>
    <eA0FF0008>
        <name>BURNER_E_TIME_OUT</name>
        <title>The burner has timed out.</title>
        <reference>() The writing thread has timed out.\r\n
() The waiting function has timed out.\r\n</reference>
        <description>Description:\r\n
(1) An error occurred when trying to use a core resource of the operating system.\r\n
(2) Try again with a different drive if you have one.\r\n
(3) Try again with a different disc.\r\n
(4) Restart the program, then try again.\r\n
(5) Restart your computer, then try again.</description>
    </eA0FF0008>
    <eA0FF0009>
        <name>BURNER_E_NEED_BLANK_DISC</name>
        <title>A blank disc is required.</title><reference></reference>
        <description>Description:\r\n
(1) The program needs a blank disc to perform the writing operation.\r\n
(2) The source data size is greater than the free space of the inserted disc.</description>
    </eA0FF0009>
    <eE0FF0001>
        <name>BURNER_E_HANDLE</name>
        <title>An incorrect handle was retrieved.</title><reference></reference>
        <description>Description:\r\n
(1) A memory address in the program's internal structure used for writing to the disc is incorrect.\r\n \r\n
(2) Failed to create an internal program component.\r\n
(3) Failed to close an internal program component.\r\n
(4) Restart the program, then try again.\r\n
(5) Restart your computer, then try again.\r\n
(6) Uninstall any other disc recording software from your computer, then try again.</description>
    </eE0FF0001>
    <eE0FF0002>
        <name>BURNER_E_TOC</name>
        <title>The disc's table of contents is incorrect.</title>
        <reference>() The table of contents is incorrect.\r\n</reference>
        <description>Description:\r\n
(1) An error occurred reading the disc.\r\n
(2) Erase the disc, then try again.\r\n
(3) Restart the program, then try again.\r\n
(4) Uninstall any other disc recording software from your computer, then try again.</description>
    </eE0FF0002>
    <eE0FF0003>
        <name>BURNER_E_MOUNT_MEDIUM</name>
        <title>A problem was detected while loading or unloading the disc.</title>
        <reference>() Failed to mount or un-mount disc.\r\n</reference>
        <description>Description:\r\n
(1) Please wait for the drive light to go off, then try again.\r\n
(2) Make sure the disc is properly placed in the drive tray, then try again.\r\n
(3) Try again with a different disc.\r\n
(4) Try again with a different drive if you have one.\r\n
(5) Restart the program, then try again.\r\n
(6) Restart your computer, then try again.</description>
    </eE0FF0003>
    <eE0FF0004>
        <name>BURNER_E_IMAGE</name>
        <title>The image file is invalid.</title>
        <reference>() The Software Development Kit being used is not the same as the SDK which made this image file.\r\n</reference>
        <description>Description:\r\n
(1) The image file is not a valid image (i.\r\ne.\r\n its format is incorrect).\r\n
(2) The production disc type for this image file does not match the inserted disc type.\r\n
(3) Verify that the file exists, then try again.\r\n
(4) Try again with a different disc.\r\n
(5) Try again with a different drive if you have one.\r\n
(6) Try again with a different image file.\r\n
(7) Restart the program, then try again.\r\n
(8) Restart your computer, then try again.</description>
    </eE0FF0004>
    <eE0FF0005>
        <name>BURNER_E_CREATE_EVENT</name>
        <title>Failed to create an internal program component .</title>
        <reference>() Failed to create an event object.\r\n</reference>
        <description>Description:\r\n
(1) An error occurred when trying to use a core resource of the operating system.\r\n
(2) Verify that the selected drive is properly connected to your computer.\r\n
(3) Restart the program, then try again.\r\n
(4) Restart your computer, then try again.\r\n
(5) Uninstall and then re-install the program, then try again.\r\n
(6) Uninstall any other disc recording software from your computer, then try again.</description>
    </eE0FF0005>
    <eE0FF0006>
        <name>BURNER_E_READ_FILE</name>
        <title>An error occurred while reading the disc.</title>
        <reference>() Failed to read data from the file or from the system pipe.\r\n</reference>
        <description>Description:\r\n
(1) Make sure the disc is properly placed in the drive tray, then try again.\r\n
(2) Try again with a different disc.\r\n
(3) Try again with a different drive if you have one.\r\n
(4) Verify that the selected drive is properly connected to your computer.\r\n
(5) Restart the program, then try again.\r\n
(6) Restart your computer, then try again.\r\n
(7) Uninstall and then re-install the program, then try again.\r\n
(8) Uninstall any other disc recording software from your computer, then try again.</description>
    </eE0FF0006>
    <eE0FF0007>
        <name>BURNER_E_WRITE_FILE</name>
        <title>An error occurred while writing to the disc.</title>
        <reference>() Failed to write data from the file or from the system pipe.\r\n</reference>
        <description>Description:\r\n
(1) Reselect files and folders from your local hard drive only, then try again.\r\n
(2) Make sure the disc is properly placed in the drive tray, then try again.\r\n
(3) Try again with a different disc.\r\n
(4) Try again with a different drive if you have one.\r\n
(5) Verify that the selected drive is properly connected to your computer.\r\n
(6) Restart the program, then try again.\r\n
(7) Restart your computer, then try again.\r\n
(8) Uninstall and then re-install the program, then try again.\r\n
(9) Uninstall any other disc recording software from your computer, then try again.</description>
    </eE0FF0007>
    <eE0FF0008>
        <name>BURNER_E_OPEN_FILE</name>
        <title>A file error occurred.</title><reference></reference>
        <description>Description:\r\n
(1) Failed to open an existing file or failed to create a file.\r\n
(2) Verify that the file exists, then try again.\r\n
(3) Make sure you have enough free space on your hard drive to add new files or folders.\r\n
(4) Try again with different files or folders.\r\n
(5) Restart the program, then try again.\r\n
(6) Restart your computer, then try again.</description>
    </eE0FF0008>
    <eE0FF0009>
        <name>BURNER_E_GET_FILE_SIZE</name>
        <title>A file size error occurred.</title><reference></reference>
        <description>Description:\r\n
(1) An error occurred when obtaining the file's size.\r\n
(2) Verify that the file exists, then try again.\r\n
(3) Make sure you have enough free space on your hard drive to add new files or folders.\r\n
(4) Try again with different files or folders.\r\n
(5) Restart the program, then try again.\r\n
(6) Restart your computer, then try again.</description>
    </eE0FF0009>
    <eE0FF000A>
        <name>BURNER_E_ASPI</name>
        <title>An ASPI error occurred.</title>
        <reference>() The ASPI layer is not loaded or contains errors.\r\n</reference>
        <description>Description:\r\n
(1) An error occurred when trying to use a core resource of the operating system.\r\n
(2) Restart the program, then try again.\r\n
(3) Restart your computer, then try again.\r\n
(4) Uninstall any other disc recording software from your computer, then try again.\r\n
(5) Uninstall and then re-install the program, then try again.</description>
    </eE0FF000A>
    <eE0FF000B>
        <name>BURNER_E_FUNC_CALL</name>
        <title>A function error occurred.</title>
        <reference>() Some specific functions are called incorrectly or executed unsuccessfully.\r\n</reference>
        <description>Description:\r\n
(1) An error occurred in the internal structure of the program.\r\n
(2) Restart the program, then try again.\r\n
(3) Restart your computer, then try again.\r\n
(4) Uninstall any other disc recording software from your computer, then try again.\r\n
(5) Uninstall and then re-install the program, then try again.</description>
    </eE0FF000B>
    <eE0FF000C>
        <name>BURNER_E_SDK_INTERNAL</name>
        <title>A burning engine error occurred.</title>
        <reference>() A Burning SDK internal error occurred.\r\n</reference>
        <description>Description:\r\n
(1) An error occurred in the internal structure of the program.\r\n
(2) Make sure the disc is properly placed in the drive tray, then try again.\r\n
(3) Try again with a different disc.\r\n
(4) Try again with a different drive if you have one.\r\n
(5) Verify that the selected drive is properly connected to your computer.\r\n
(6) Restart the program, then try again.\r\n
(7) Restart your computer, then try again.\r\n
(8) Uninstall any other disc recording software from your computer, then try again.\r\n
(9) Uninstall and then re-install the program, then try again.</description>
    </eE0FF000C>
    <eE0FF000D>
        <name>BURNER_E_SDK_NOT_INIT</name>
        <title>A burning engine initialization error occurred.</title>
        <reference>() The implemented software development kit is not initialized yet.\r\n
() Failed to initialize the SDK.\r\n</reference>
        <description>Description:\r\n
(1) An error occurred in the internal structure of the program.\r\n
(2) Restart the program, then try again.\r\n
(3) Restart your computer, then try again.\r\n
(4) Uninstall any other disc recording software from your computer, then try again.\r\n
(5) Uninstall and then re-install the program, then try again.</description>
    </eE0FF000D>
    <eE0FF000E>
        <name>BURNER_E_BUF_UNDER_RUN</name>
        <title>A buffer underrun error occurred.</title><reference></reference>
        <description>Description:\r\n
(1) Data was not passed quickly enough to your burning drive.\r\n
(2) Try again with a different drive if you have one.\r\n
(3) Try again with a different disc.\r\n
(4) Close any other programs that are running, then try again.\r\n
(5) Verify that the selected drive is properly connected to your computer.\r\n
(6) Try again with different files or folders.\r\n
(7) Restart the program, then try again.\r\n
(8) Restart your computer, then try again.\r\n
(9) Make sure your computer meets the minimum system requirements for this application.</description>
    </eE0FF000E>
    <eE0FF000F>
        <name>BURNER_E_READ</name>
        <title>An error occurred while reading the disc.</title>
        <reference>() The disc is empty but the client is trying to read content from the inserted disc.\r\n</reference>
        <description>Description:\r\n
(1) Failed to read information from the drive or the inserted disc.\r\n
(2) Make sure the disc is properly placed in the drive tray, then try again.\r\n
(3) Try again with a different disc.\r\n
(4) Try again with a different drive if you have one.\r\n
(5) Verify that the selected drive is properly connected to your computer.\r\n
(6) Restart the program, then try again.\r\n
(7) Restart your computer, then try again.\r\n
(8) Uninstall and then re-install the program, then try again.\r\n
(9) Uninstall any other disc recording software from your computer, then try again.</description>
    </eE0FF000F>
    <eE0FF0010>
        <name>BURNER_E_WRITE</name>
        <title>An error occurred while writing to the disc.</title>
        <reference>() Invalid address on disc for writing operation.\r\n
() Failed to create the image file.\r\n</reference>
        <description>Description:\r\n
(1) Failed to write data to the inserted disc.\r\n
(2) The inserted disc is damaged.\r\n
(3) Make sure the disc is properly placed in the drive tray, then try again.\r\n
(4) Try again with a different disc.\r\n
(5) Try again with a different drive if you have one.\r\n
(6) Verify that the selected drive is properly connected to your computer.\r\n
(7) Restart the program, then try again.\r\n
(8) Restart your computer, then try again.\r\n
(9) Uninstall and then re-install the program, then try again.\r\n
(10) Uninstall any other disc recording software from your computer, then try again.</description>
    </eE0FF0010>
    <eE0FF0011>
        <name>BURNER_E_RETURN_CODE</name>
        <title>An unknown burning error occurred.</title>
        <reference>() The returned result is undocumented and unexpected from the SDK.\r\n</reference>
        <description>Description:\r\n
(1) Close any other programs that are running, then try again.\r\n
(2) Restart the program, then try again.\r\n
(3) Restart your computer, then try again.\r\n
(4) Uninstall and then re-install the program, then try again.\r\n
(5) Uninstall any other disc recording software from your computer, then try again.</description>
    </eE0FF0011>
    <eE0FF0012>
        <name>BURNER_E_AIN_CONTROL</name>
        <title>An Auto Insert Notification error occurred.</title><reference></reference>
        <description>Description:\r\n
(1) The drive's Auto Insert Notification mechanism is not activated.\r\n
(2) Try again with a different drive if you have one.\r\n
(3) Verify that the selected drive is properly connected to your computer.\r\n
(4) Close any other disc playback or recording software, then try again.\r\n
(5) Restart the program, then try again.\r\n
(6) Restart your computer, then try again.\r\n
(7) Uninstall any other disc recording software from your computer, then try again.\r\n
(8) Uninstall and then re-install the program, then try again.</description>
    </eE0FF0012>
    <eE0FF0013>
        <name>BURNER_E_EMPTY</name>
        <title>An empty data error occurred.</title>
        <reference>() The settled data tree is composed of only a root node, and the selected burning option is not to create a bootable disc.\r\n</reference>
        <description>Description:\r\n
(1) The created image file is empty.\r\n
(2) The source disc is empty.\r\n
(3) Make sure the disc is properly placed in the drive tray, then try again.\r\n
(4) Try again with different files or folders.\r\n
(5) Try again with a different disc.\r\n
(6) Try again with a different drive if you have one.\r\n
(7) Verify that the selected drive is properly connected to your computer.\r\n
(8) Restart the program, then try again.\r\n
(9) Restart your computer, then try again.</description>
    </eE0FF0013>
    <eE0FF0014>
        <name>BURNER_E_DVD_STRUCTURE</name>
        <title>A DVD-Video format error occurred.</title><reference></reference>
        <description>Description:\r\n
(1) The DVD folder does not contain the necessary file "VIDEO_TS.\r\nIFO" or "VTS_01_0.\r\nIFO".\r\n
(2) The DVD folder does not comply with the DVD specification.\r\n Some fields in the *.\r\nIFO file are incorrect.\r\n
(3) The DVD folder contains more than one kind of DVD folder (generic DVD folder, MVR DVD folder, or PVR DVD folder).\r\n
(4) Verify that the files exist, then try again.\r\n
(5) Try again with different files or folders.\r\n
(6) Make sure you have enough free space on your hard drive to add temporary files or folders.\r\n
(7) Restart the program, then try again.\r\n
(8) Restart your computer, then try again.</description>
    </eE0FF0014>
    <eE0FF0015>
        <name>BURNER_E_SDK_DEMO_VER</name>
        <title>A demonstration version of the burning engine error occurred.</title>
        <reference>() The implemented Burning SDK is only a demo version.\r\n</reference>
        <description>Description:\r\n
(1) Please install the latest version of the program, then try again.</description>
    </eE0FF0015>
    <eE0FF0016>
        <name>BURNER_E_FUNC_PARAMETER</name>
        <title>A burning engine function error occurred.</title>
        <reference>() The parameters for calling a function or selecting an option are incorrect.\r\n
(1) The index for array accessing or drive selection is out of range.\r\n</reference>
        <description>Description:\r\n
(2) An error occurred in the internal structure of the program.\r\n
(3) Make sure the disc is properly placed in the drive tray, then try again.\r\n
(4) Try again with a different drive if you have one.\r\n
(5) Verify that the selected drive is properly connected to your computer.\r\n
(6) Restart the program, then try again.\r\n
(7) Restart your computer, then try again.\r\n
(8) Close any other disc playback or recording software, then try again.\r\n
(9) Uninstall any other disc recording software from your computer, then try again.\r\n
(10) Uninstall and then re-install the program, then try again.</description>
    </eE0FF0016>
    <eE0FF0017>
        <name>BURNER_E_DRIVE_COMMUNICATE</name>
        <title>An error communicating with the drive was detected.</title><reference></reference>
        <description>Description:\r\n
(1) A communication error occurred between the program and the drive.\r\n
(2) The drive does not respond to commands sent by the program.\r\n
(3) Try again with a different drive if you have one.\r\n
(4) Verify that the selected drive is properly connected to your computer.\r\n
(5) Restart the program, then try again.\r\n
(6) Restart your computer, then try again.\r\n
(7) Close any other disc playback or recording software, then try again.\r\n
(8) Uninstall any other disc recording software from your computer, then try again.\r\n
(9) Uninstall and then re-install the program, then try again.</description>
    </eE0FF0017>
    <eE0FF0018>
        <name>BURNER_E_DRIVE_UNIT</name>
        <title>A drive or disc error occurred.</title><reference></reference>
        <description>Description:\r\n
(1) The inserted disc is damaged or its format is corrupted.\r\n
(2) The size of the source data is larger than the disc's free space.\r\n
(2) The drive does not respond to commands sent by the program.\r\n
(3) Make sure the disc is properly placed in the drive tray, then try again.\r\n
(4) Try again with a different disc.\r\n
(5) Try again with a different drive if you have one.\r\n
(6) Verify that the selected drive is properly connected to your computer.\r\n
(7) Restart the program, then try again.\r\n
(8) Restart your computer, then try again.\r\n
(9) Close any other disc playback or recording software, then try again.\r\n
(10) Uninstall any other disc recording software from your computer, then try again.\r\n
(11) Uninstall and then re-install the program, then try again.</description>
    </eE0FF0018>
    <eE0FF0019>
        <name>BURNER_E_CREATE_THREAD</name>
        <title>A threading error occurred.</title><reference></reference>
        <description>Description:\r\n
(1) An error occurred when trying to use a core resource of the operating system.\r\n
(2) Try again with a different drive if you have one.\r\n
(3) Verify that the selected drive is properly connected to your computer.\r\n
(4) Restart the program, then try again.\r\n
(5) Restart your computer, then try again.\r\n
(6) Close any other disc playback or recording software, then try again.\r\n
(7) Uninstall any other disc recording software from your computer, then try again.\r\n
(8) Uninstall and then re-install the program, then try again.</description>
    </eE0FF0019>
    <eE0FF001A>
        <name>BURNER_E_DEVICE_MANAGER</name>
        <title>A burning engine or drive error occurred.</title><reference></reference>
        <description>Description:\r\n
(1) An error occurred during the creation of the device manager.\r\n
(2) Make sure the disc is properly placed in the drive tray, then try again.\r\n
(3) Try again with a different disc.\r\n
(4) Try again with a different drive if you have one.\r\n
(5) Verify that the selected drive is properly connected to your computer.\r\n
(6) Restart the program, then try again.\r\n
(7) Restart your computer, then try again.\r\n
(8) Close any other disc playback or recording software, then try again.\r\n
(9) Close any other programs that are running, then try again.\r\n
(10) Uninstall any other disc recording software from your computer, then try again.\r\n
(11) Uninstall and then re-install the program, then try again.</description>
    </eE0FF001A>
    <eE0FF001B>
        <name>BURNER_E_CREATE_READER_WRITER</name>
        <title>An error occurred creating the burning engine's disc reader or writer.</title><reference></reference>
        <description>Description:\r\n
(1) An error occurred when accessing one of your CD or DVD disc drives.\r\n
(2) Verify that the selected drive is properly connected to your computer.\r\n
(3) Restart the program, then try again.\r\n
(4) Restart your computer, then try again.\r\n
(5) Close any other disc playback or recording software, then try again.\r\n
(6) Close any other programs that are running, then try again.\r\n
(7) Uninstall any other disc recording software from your computer, then try again.\r\n
(8) Uninstall and then re-install the program, then try again.</description>
    </eE0FF001B>
    <eE0FF001C>
        <name>BURNER_E_THREAD_EXECUTION</name>
        <title>A threading operation of the burning engine failed.</title>
        <reference>() Failed to execute the worker thread.\r\n</reference>
        <description>Description:\r\n
(1) An error occurred when trying to use a core resource of the operating system.\r\n
(2) Try again with a different drive if you have one.\r\n
(3) Verify that the selected drive is properly connected to your computer.\r\n
(4) Restart the program, then try again.\r\n
(5) Restart your computer, then try again.\r\n
(6) Close any other disc playback or recording software, then try again.\r\n
(7) Uninstall any other disc recording software from your computer, then try again.\r\n
(8) Uninstall and then re-install the program, then try again.</description>
    </eE0FF001C>
    <eE0FF001D>
        <name>BURNER_E_FILE_SYSTEM</name>
        <title>A file system error occurred.</title><reference></reference>
        <description>Description:\r\n
(1) The file system for reading or writing the disc is incorrect or not supported yet.\r\n
(2) Make sure the disc is properly placed in the drive tray.\r\n
(3) Try again with a different disc.\r\n
(4) Restart the program, then try again.\r\n
(5) Restart your computer, then try again.</description>
    </eE0FF001D>
    <eE0FF001E>
        <name>BURNER_E_CALLBACK_FUNC</name>
        <title>A burning engine callback function error occurred.</title>
        <reference>() Failed to execute callback function.\r\n</reference>
        <description>Description:\r\n
(1) An error occurred when trying to use a core resource of the operating system.\r\n
(2) Try again with a different drive if you have one.\r\n
(3) Verify that the selected drive is properly connected to your computer.\r\n
(4) Restart the program, then try again.\r\n
(5) Restart your computer, then try again.\r\n
(6) Close any other disc playback or recording software, then try again.\r\n
(7) Close any other programs that are running, then try again.\r\n
(8) Uninstall any other disc recording software from your computer, then try again.\r\n
(9) Uninstall and then re-install the program, then try again.</description>
    </eE0FF001E>
    <eE0FF001F>
        <name>BURNER_E_FIND_SPI_NUM</name>
        <title>A VCD format error occurred.</title>
        <reference>() An error occurred during the computation of the segment play item number (VCD/SVCD).\r\n</reference>
        <description>Description:\r\n
(1) An error occurred in the internal structure of the program.\r\n
(2) Verify that the file exists, then try again.\r\n
(3) Try again with different files or folders.\r\n
(4) Restart the program, then try again.\r\n
(5) Restart your computer, then try again.\r\n
(6) Uninstall and then re-install the program, then try again.</description>
    </eE0FF001F>
    <eE0FF0020>
        <name>BURNER_E_OUT_OF_MEMORY</name>
        <title>A system memory error occurred.</title><reference></reference>
        <description>Description:\r\n
(1) Out of system memory.\r\n
(2) Close any other programs that are running, then try again.\r\n
(3) Restart your computer, then try again.\r\n
(4) Uninstall and then re-install the program, then try again.\r\n
(5) Make sure your computer meets the minimum system requirements for this application.</description>
    </eE0FF0020>
    <eE0FF0021>
        <name>BURNER_E_ERASE_DISC</name>
        <title>An erasing error occurred.</title><reference></reference>
        <description>Description:\r\n
(1) The inserted disc may be damaged.\r\n
(2) Make sure the disc is properly placed in the drive tray, then try again.\r\n
(3) Try again with a different disc.\r\n
(4) Try again with a different drive if you have one.\r\n
(5) Verify that the selected drive is properly connected to your computer.</description>
    </eE0FF0021>
    <eE0FF0022>
        <name>BURNER_E_RUNTIME_PLAYER_PATH</name>
        <title>A run-time PowerDVD path error occurred.</title>
        <reference>() The assigned path of the included run-time PowerDVD pack is incorrect.\r\n
() Verify that the run-time PowerDVD player has been installed, then try again.\r\n</reference>
        <description>Description:\r\n
(1) An error occurred in the internal structure of the program.\r\n
(2) Restart the program, then try again.\r\n
(3) Restart your computer, then try again.\r\n
(4) Uninstall and then re-install the program, then try again.</description>
    </eE0FF0022>
    <eE0FF0023>
        <name>BURNER_E_GET_VER_INFO</name>
        <title>A version error occurred.</title>
        <reference>() Failed to obtain the version information of the implemented Burning SDK.\r\n
() Unable to locate the DLL files necessary for the burning SDK.\r\n</reference>
        <description>Description:\r\n
(1) An error occurred in the internal structure of the program.\r\n
(2) Restart the program, then try again.\r\n
(3) Restart your computer, then try again.\r\n
(4) Uninstall and then re-install the program, then try again.</description>
    </eE0FF0023>
    <eE0FF0024>
        <name>BURNER_E_NULL_CSP</name>
        <title>A COM or casting error occurred.</title>
        <reference>() Null COM Smart Pointer is used.\r\n
() Cast operation failed (e.\r\ng.\r\n dynamic_cast, static_cast, etc).\r\n</reference>
        <description>Description:\r\n
(1) An error occurred in the internal structure of the program.\r\n
(2) Restart the program, then try again.\r\n
(3) Restart your computer, then try again.\r\n
(4) Uninstall and then re-install the program, then try again.</description>
    </eE0FF0024>
    <eE0FF0025>
        <name>BURNER_E_SET_TRACK</name>
        <title>A setting track information error occurred.</title>
        <reference>() Failed to set track information.\r\n</reference>
        <description>Description:\r\n
(1) An error occurred in the internal structure of the program.\r\n
(2) Make sure the disc is properly placed in the drive tray.\r\n
(3) Try again with a different disc.\r\n
(4) Try again with a different drive if you have one.\r\n
(5) Verify that the selected drive is properly connected to your computer.\r\n
(6) Restart the program, then try again.\r\n
(7) Restart your computer, then try again.</description>
    </eE0FF0025>
    <eE0FF0026>
        <name>BURNER_E_COPY</name>
        <title>A copying error occurred.</title><reference></reference>
        <description>Description:\r\n
(1) An error occurred when copying the string, file, or folder.\r\n
(2) Verify that the file exists, then try again.\r\n
(3) Try again with different files or folders.\r\n
(4) Restart the program, then try again.\r\n
(5) Restart your computer, then try again.</description>
    </eE0FF0026>
    <eE0FF0027>
        <name>BURNER_E_GET_EVENT_HANDLE</name>
        <title>A burning engine event error occurred.</title>
        <reference>() An error occurred when obtaining the existing event handle.\r\n</reference>
        <description>Description:\r\n
(1) An error occurred when trying to use a core resource of the operating system.\r\n
(2) Make sure the disc is properly placed in the drive tray.\r\n
(3) Try again with a different disc.\r\n
(4) Try again with a different drive if you have one.\r\n
(5) Verify that the selected drive is properly connected to your computer.\r\n
(6) Restart the program, then try again.\r\n
(7) Restart your computer, then try again.\r\n
(8) Close any other disc playback or recording software, then try again.\r\n
(9) Close any other programs that are running, then try again.\r\n
(10) Uninstall any other disc recording software from your computer, then try again.\r\n
(11) Uninstall and then re-install the program, then try again.</description>
    </eE0FF0027>
    <eE0FF0028>
        <name>BURNER_E_CHANGE_FILE_EXT_NAME</name>
        <title>A file extension error occurred.</title><reference></reference>
        <description>Description:\r\n
(1) Failed to change a file name's extension.\r\n
(2) Verify that the file exists, then try again.\r\n
(3) Try again with different files or folders.\r\n
(4) Restart the program, then try again.\r\n
(5) Restart your computer, then try again.</description>
    </eE0FF0028>
    <eE0FF0029>
        <name>BURNER_E_SECTOR_MODE</name>
        <title>A sector mode error occurred.</title>
        <reference>() The sector mode used is incorrect or not supported.\r\n</reference>
        <description>Description:\r\n
(1) An error occurred in the internal structure of the program.\r\n
(2) Try again with a different drive if you have one.\r\n
(3) Try again with different files or folders.\r\n
(4) Try again with a different disc.\r\n
(5) Verify that the selected drive is properly connected to your computer.\r\n
(6) Restart the program, then try again.\r\n
(7) Restart your computer, then try again.</description>
    </eE0FF0029>
    <eE0FF002A>
        <name>BURNER_E_WRITE_MODE</name>
        <title>A writing mode error occurred.</title>
        <reference>() The writing mode used is incorrect or not supported.\r\n</reference>
        <description>Description:\r\n
(1) An error occurred in the internal structure of the program.\r\n
(2) Try again with a different drive if you have one.\r\n
(3) Try again with different files or folders.\r\n
(4) Try again with a different disc.\r\n
(5) Verify that the selected drive is properly connected to your computer.\r\n
(6) Restart the program, then try again.\r\n
(7) Restart your computer, then try again.</description>
    </eE0FF002A>
    <eE0FF002B>
        <name>BURNER_E_CHANGE_MEDIUM</name>
        <title>An error occurred while changing media.</title>
        <reference>() Failed to change media.\r\n</reference>
        <description>Description:\r\n
(1) Make sure the disc is properly placed in the drive tray.\r\n
(2) Try again with a different disc.\r\n
(3) Try again with a different drive if you have one.\r\n
(4) Verify that the selected drive is properly connected to your computer.\r\n
(5) Restart the program, then try again.\r\n
(6) Restart your computer, then try again.</description>
    </eE0FF002B>
    <eE0FF002C>
        <name>BURNER_E_INIT_CDR</name>
        <title>A disc initialization error occurred.</title>
        <reference>() Failed to initialize recordable disc.\r\n</reference>
        <description>Description:\r\n
(1) Make sure the disc is properly placed in the drive tray.\r\n
(2) Try again with a different disc.\r\n
(3) Try again with a different drive if you have one.\r\n
(4) Verify that the selected drive is properly connected to your computer.\r\n
(5) Restart the program, then try again.\r\n
(6) Restart your computer, then try again.</description>
    </eE0FF002C>
    <eE0FF002D>
        <name>BURNER_E_TRACK_INFO</name>
        <title>A track information error occurred.</title>
        <reference>() The disc track information is incorrect.\r\n</reference>
        <description>Description:\r\n
(1) Make sure the disc is properly placed in the drive tray.\r\n
(2) Try again with a different disc.\r\n
(3) Try again with a different drive if you have one.\r\n
(4) Verify that the selected drive is properly connected to your computer.\r\n
(5) Restart the program, then try again.\r\n
(6) Restart your computer, then try again.</description>
    </eE0FF002D>
    <eE0FF002E>
        <name>BURNER_E_WAIT_FUNC</name>
        <title>A Windows wait function error occurred.</title>
        <reference>() Waiting Windows SDK functions failed.\r\n</reference>
        <description>Description:\r\n
(1) An error occurred when trying to use a core resource of the operating system.\r\n
(2) Restart the program, then try again.\r\n
(3) Restart your computer, then try again.\r\n
(4) Close any other programs that are running, then try again.\r\n
(5) Uninstall and then re-install the program, then try again.\r\n
(6) Make sure your computer meets the minimum system requirements for this application.</description>
    </eE0FF002E>
    <eE0FF002F>
        <name>BURNER_E_NULL_STR</name>
        <title>A null string error occurred.</title>
        <reference>() The string used is a null string.\r\n</reference>
        <description>Description:\r\n
(1) Verify that the file exists, then try again.\r\n
(2) Try again with different files or folders.\r\n
(3) Restart the program, then try again.\r\n
(4) Close any other programs that are running, then try again.\r\n
(5) Restart your computer, then try again.\r\n
(6) Uninstall and then re-install the program, then try again.</description>
    </eE0FF002F>
    <eE0FF0030>
        <name>BURNER_E_WORKING_PATH</name>
        <title>A file path error occurred.</title>
        <reference>() The program's working path is a null string or is incorrect.\r\n</reference>
        <description>Description:\r\n
(1) Verify that the source files and folders exist and are correct, then try again.\r\n
(2) Try again with different files or folders.\r\n
(3) Restart the program, then try again.\r\n
(4) Close any other programs that are running, then try again.\r\n
(5) Restart your computer, then try again.</description>
    </eE0FF0030>
    <eE0FF0031>
        <name>BURNER_E_LOAD_DLL</name>
        <title>An error occurred when loading a DLL.</title>
        <reference>() Failed to load DLL files.\r\n</reference>
        <description>Description:\r\n
(1) An error occurred loading a program component.\r\n
(2) Try again with a different drive if you have one.\r\n
(3) Verify that the selected drive is properly connected to your computer.\r\n
(4) Restart the program, then try again.\r\n
(5) Restart your computer, then try again.\r\n
(6) Close any other disc playback or recording software, then try again.\r\n
(7) Close any other programs that are running, then try again.\r\n
(8) Uninstall any other disc recording software from your computer, then try again.\r\n
(9) Uninstall and then re-install the program, then try again.\r\n
(10) Make sure your computer meets the minimum system requirements for this application.</description>
    </eE0FF0031>
    <eE0FF0032>
        <name>BURNER_E_FREE_DLL</name>
        <title>An error occurred when unloading a DLL.</title>
        <reference>() Failed to release the loaded DLL files.\r\n</reference>
        <description>Description:\r\n
(1) An error occurred unloading a program component.\r\n
(2) Verify that the selected drive is properly connected to your computer.\r\n
(3) Restart the program, then try again.\r\n
(4) Restart your computer, then try again.\r\n
(5) Close any other disc playback or recording software, then try again.\r\n
(6) Close any other programs that are running, then try again.\r\n
(7) Uninstall any other disc recording software from your computer, then try again.\r\n
(8) Uninstall and then re-install the program, then try again.</description>
    </eE0FF0032>
    <eE0FF0033>
        <name>BURNER_E_GET_PROC_ADDR</name>
        <title>A system address error occurred.</title>
        <reference>() Failed to obtain the procedure's addresses.\r\n</reference>
        <description>Description:\r\n
(1) An error occurred when trying to use a core resource of the operating system.\r\n
(2) Restart the program, then try again.\r\n
(3) Restart your computer, then try again.\r\n
(4) Close any other disc playback or recording software, then try again.\r\n
(5) Close any other programs that are running, then try again.\r\n
(6) Uninstall any other disc recording software from your computer, then try again.\r\n
(7) Uninstall and then re-install the program, then try again.</description>
    </eE0FF0033>
    <eE0FF0034>
        <name>BURNER_E_DIR</name>
        <title>A directory error occurred.</title><reference></reference>
        <description>Description:\r\n
(1) Failed to obtain or set the current directory.\r\n
(2) Failed to create a directory.\r\n
(3) Verify that the folder exists, then try again.\r\n
(4) Try again with different files or folders.</description>
    </eE0FF0034>
    <eE0FF0035>
        <name>BURNER_E_FILE_COUNT</name>
        <title>A file count error occurred.</title><reference></reference>
        <description>Description:\r\n
(1) The number of source files is incorrect during the production process, or else is zero.\r\n
(2) Verify that the file exists, then try again.\r\n
(3) Try again with different files or folders.\r\n
(4) Restart the program, then try again.\r\n
(5) Restart your computer, then try again.</description>
    </eE0FF0035>
    <eE0FF0036>
        <name>BURNER_E_AUDIO_DISC</name>
        <title>An Audio CD error occurred.</title><reference></reference>
        <description>Description:\r\n
(1) The inserted disc is not an Audio CD or the current track is not an audio track.\r\n
(2) Verify that the source disc is an Audio CD or that the source file is an audio track.\r\n
(3) Make sure the disc is properly placed in the drive tray.\r\n
(4) Try again with a different disc.\r\n
(5) Try again with a different drive if you have one.\r\n
(6) Verify that the selected drive is properly connected to your computer.\r\n
(7) Restart the program, then try again.\r\n
(8) Restart your computer, then try again.</description>
    </eE0FF0036>
    <eE0FF0037>
        <name>BURNER_E_MAP_FILE</name>
        <title>A mapping file error occurred.</title><reference></reference>
        <description>Description:\r\n
(1) An error occurred when trying to use a core resource of the operating system.\r\n
(2) Restart the program, then try again.\r\n
(3) Restart your computer, then try again.\r\n
(4) Close any other disc playback or recording software, then try again.\r\n
(5) Close any other programs that are running, then try again.\r\n
(6) Uninstall any other disc recording software from your computer, then try again.\r\n
(7) Uninstall and then re-install the program, then try again.</description>
    </eE0FF0037>
    <eE0FF0038>
        <name>BURNER_E_PIPE</name>
        <title>A pipe error occurred.</title><reference></reference>
        <description>Description:\r\n
(1) An error occurred when trying to use a core resource of the operating system.\r\n
(2) Restart the program, then try again.\r\n
(3) Restart your computer, then try again.\r\n
(4) Close any other disc playback or recording software, then try again.\r\n
(5) Close any other programs that are running, then try again.\r\n
(6) Uninstall any other disc recording software from your computer, then try again.\r\n
(7) Uninstall and then re-install the program, then try again.</description>
    </eE0FF0038>
    <eE0FF0039>
        <name>BURNER_E_CUSTOM_TRACK_CB</name>
        <title>A custom track callback error occurred.</title><reference></reference>
        <description>Description:\r\n
(1) Make sure the disc is properly placed in the drive tray.\r\n
(2) Try again with a different disc.\r\n
(3) Try again with a different drive if you have one.\r\n
(4) Verify that the selected drive is properly connected to your computer.\r\n
(5) An error occurred when trying to use a core resource of the operating system.\r\n
(6) Restart the program, then try again.\r\n
(7) Restart your computer, then try again.\r\n
(8) Close any other disc playback or recording software, then try again.\r\n
(9) Close any other programs that are running, then try again.\r\n
(10) Uninstall any other disc recording software from your computer, then try again.\r\n
(11) Uninstall and then re-install the program, then try again.</description>
    </eE0FF0039>
    <eE0FF003A>
        <name>BURNER_E_LEAD_IN</name>
        <title>An error occurred when writing the lead-in.</title><reference></reference>
        <description>Description:\r\n
(1) Failed to write lead-in data on the disc.\r\n
(2) Make sure the disc is properly placed in the drive tray.\r\n
(3) Try again with a different disc.\r\n
(4) Try again with a different drive if you have one.\r\n
(5) Verify that the selected drive is properly connected to your computer.\r\n
(6) Restart the program, then try again.\r\n
(7) Restart your computer, then try again.\r\n
(8) Close any other disc playback or recording software, then try again.\r\n
(9) Close any other programs that are running, then try again.\r\n
(10) Uninstall any other disc recording software from your computer, then try again.\r\n
(11) Uninstall and then re-install the program, then try again.</description>
    </eE0FF003A>
    <eE0FF003B>
        <name>BURNER_E_LEAD_OUT</name>
        <title>An error occurred when writing the lead-out.</title><reference></reference>
        <description>Description:\r\n
(1) Failed to write lead-out data on disc.\r\n
(2) Make sure the disc is properly placed in the drive tray.\r\n
(3) Try again with a different disc.\r\n
(4) Try again with a different drive if you have one.\r\n
(5) Verify that the selected drive is properly connected to your computer.\r\n
(6) Restart the program, then try again.\r\n
(7) Restart your computer, then try again.\r\n
(8) Close any other disc playback or recording software, then try again.\r\n
(9) Close any other programs that are running, then try again.\r\n
(10) Uninstall any other disc recording software from your computer, then try again.\r\n
(11) Uninstall and then re-install the program, then try again.</description>
    </eE0FF003B>
    <eE0FF003C>
        <name>BURNER_E_GAP</name>
        <title>An error occurred when writing a disc gap.</title>
        <reference>() Failed to write pregap or postgap on to the disc.\r\n</reference>
        <description>Description:\r\n
(1) Make sure the disc is properly placed in the drive tray.\r\n
(2) Try again with a different disc.\r\n
(3) Try again with a different drive if you have one.\r\n
(4) Verify that the selected drive is properly connected to your computer.\r\n
(5) Restart the program, then try again.\r\n
(6) Restart your computer, then try again.\r\n
(7) Close any other disc playback or recording software, then try again.\r\n
(8) Close any other programs that are running, then try again.\r\n
(9) Uninstall any other disc recording software from your computer, then try again.\r\n
(10) Uninstall and then re-install the program, then try again.</description>
    </eE0FF003C>
    <eE0FF003D>
        <name>BURNER_E_NODE</name>
        <title>An error occurred when compiling data.</title>
        <reference>() An error occurred when inserting, deleting, or copying a tree node.\r\n
() Some data tree node property settings are incorrect.\r\n</reference>
        <description>Description:\r\n
(1) Verify that the file exists, then try again.\r\n
(2) Try again with different files or folders.\r\n
(3) Restart the program, then try again.\r\n
(4) Restart your computer, then try again.\r\n
(5) Close any other disc playback or recording software, then try again.\r\n
(6) Close any other programs that are running, then try again.\r\n
(7) Uninstall any other disc recording software from your computer, then try again.\r\n
(8) Uninstall and then re-install the program, then try again.</description>
    </eE0FF003D>
    <eE0FF003E>
        <name>BURNER_E_OVER_SIZE</name>
        <title>A data size error occurred.</title>
        <reference>() The size of input buffer is insufficient to contain the retrieved data to output.\r\n</reference>
        <description>Description:\r\n
(1) The total size of source data is larger than the free space of the inserted disc or HDD.\r\n
(2) The total size of the source data and the added file system required to reference it is larger than the free space of the inserted disc or HDD.\r\n
(3) Remove some files or folders, then try again.</description>
    </eE0FF003E>
    <eE0FF003F>
        <name>BURNER_E_SESSION</name>
        <title>A multisession disc data error occurred.</title><reference></reference>
        <description>Description:\r\n
(1) Failed to import the previous data session of the inserted disc.\r\n
(2) Verify that the correct disc is inserted, then try again.\r\n
(3) Erase the disc, then try again.\r\n
(4) Try again with a different disc.</description>
    </eE0FF003F>
    <eE0FF0040>
        <name>BURNER_E_NO_DRIVE</name>
        <title>A system drive error occurred.</title><reference></reference>
        <description>Description:\r\n
(1) There is no reader or writer drive connected to this computer.\r\n
(2) Try again with a different drive if you have one.\r\n
(3) Verify that the selected drive is properly connected to your computer.\r\n
(4) Restart the program, then try again.\r\n
(5) Restart your computer, then try again.</description>
    </eE0FF0040>
    <eE0FF0041>
        <name>BURNER_E_NOT_IMPL</name>
        <title>A function error occurred.</title><reference></reference>
        <description>Description:\r\n
(1) An error occurred in the internal structure of the program.\r\n
(2) Restart the program, then try again.\r\n
(3) Restart your computer, then try again.</description>
    </eE0FF0041>
    <eE0FF0042>
        <name>BURNER_E_SYSTEM_PATH</name>
        <title>A directory error occurred.</title><reference></reference>
        <description>Description:\r\n
(1) Failed to obtain a Windows system directory.\r\n
(2) Verify that the folder exists, then try again.\r\n
(3) Try again with different files or folders.\r\n
(4) Restart the program, then try again.\r\n
(5) Restart your computer, then try again.\r\n
(6) Close any other disc playback or recording software, then try again.\r\n
(7) Close any other programs that are running, then try again.</description>
    </eE0FF0042>
    <eE0FF0043>
        <name>BURNER_E_SYSTEM_VER</name>
        <title>A system version error occurred.</title><reference></reference>
        <description>Description:\r\n
(1) Failed to determine the current version of your Windows operating system.\r\n
(2) Restart the program, then try again.\r\n
(3) Restart your computer, then try again.\r\n
(4) Close any other programs that are running, then try again.\r\n
(5) Uninstall and then re-install the program, then try again.\r\n
(6) Make sure your computer meets the minimum system requirements for this application.</description>
    </eE0FF0043>
    <eE0FF0044>
        <name>BURNER_E_SYS_SHELL_CMD</name>
        <title>A system shell error occurred.</title>
        <reference>() Execution of the system shell command failed (e.\r\ng.\r\n failed to run "RegEdit.\r\nexe").\r\n</reference>
        <description>Description:\r\n
(1) An error occurred when trying to use a core resource of the operating system.\r\n
(2) Restart the program, then try again.\r\n
(3) Restart your computer, then try again.\r\n
(4) Close any other programs that are running, then try again.\r\n
(5) Uninstall and then re-install the program, then try again.\r\n
(6) Make sure your computer meets the minimum system requirements for this application.</description>
    </eE0FF0044>
    <eE0FF0045>
        <name>BURNER_E_SYS_REGISTRY</name>
        <title>A registry error occurred.</title>
        <reference>() An error occurred when opening, creating, or querying the registry key value.\r\n</reference>
        <description>Description:\r\n
(1) An error occurred when trying to use a core resource of the operating system.\r\n
(2) Restart the program, then try again.\r\n
(3) Restart your computer, then try again.\r\n
(4) Uninstall and then re-install the program, then try again.</description>
    </eE0FF0045>
    <eE0FF0046>
        <name>BURNER_E_BOOTABLE_DISK</name>
        <title>A bootable disc error occurred.</title><reference></reference>
        <description>Description:\r\n
(1) The selected bootable floppy disk is incorrect for creating a bootable image file.</description>
    </eE0FF0046>
    <eE0FF0047>
        <name>BURNER_E_REBOOT</name>
        <title>The system needs to be rebooted.</title>
        <reference>() The data "asapi" for the registry value "UpperFilters" was not found.\r\n The burning engine has added this data correctly.\r\n</reference>
        <description>Description:\r\n
(1) Restart your computer, then try again.\r\n
</description>
    </eE0FF0047>
    <eE0FF0048>
        <name>BURNER_E_FILE_NOT_FOUND</name>
        <title>A file error occurred.</title><reference></reference>
        <description>Description:\r\n
(1) File is not found in the directory currently being searched.\r\n
(2) Verify that the file or folder exists and is intact, then try again.</description>
    </eE0FF0048>
    <eE0FF0049>
        <name>BURNER_E_FIND</name>
        <title>A file error occurred.</title><reference></reference>
        <description>Description:\r\n
(1) Failed to find the file in the currently searching directory.\r\n
(2) Verify that the file or folder exists and is intact, then try again.</description>
    </eE0FF0049>
    <eE0FF004A>
        <name>BURNER_E_FILE</name>
        <title>A file error occurred.</title>
        <reference>() Failed to move file pointer.\r\n</reference>
        <description>Description:\r\n
(1) Verify that the file or folder exists and is intact, then try again.\r\n
(2) Try again with different files or folders.\r\n
</description>
    </eE0FF004A>
    <eE0FF004B>
        <name>BURNER_E_ATTRIB</name>
        <title>A file error occurred.</title>
        <reference>() Failed to modify the file's attribute.\r\n</reference>
        <description>Description:\r\n
(1) Verify that the file or folder exists and is intact, then try again.\r\n
(2) Try again with different files or folders.</description>
    </eE0FF004B>
    <eE0FF004C>
        <name>BURNER_E_DEL</name>
        <title>A file error occurred.</title><reference></reference>
        <description>Description:\r\n
(1) An error occurred when deleting string, file, or folder.\r\n
(2) Verify that the file or folder exists and is intact, then try again.\r\n
(3) Try again with different files or folders.</description>
    </eE0FF004C>
    <eE0FF004D>
        <name>BURNER_E_LEN</name>
        <title>A string error occurred.</title>
        <reference>() The length of the string of the output LPTSTR parameter, used to keep the returned data, is too short.\r\n</reference>
        <description>Description:\r\n
(1) Verify that the file or folder exists and is intact, then try again.\r\n
(2) Try again with different files or folders.\r\n
(3) Restart the program, then try again.\r\n
(4) Restart your computer, then try again.</description>
    </eE0FF004D>
    <eE0FF004E>
        <name>BURNER_E_PROTECTED</name>
        <title>A disc protection error occurred.</title><reference></reference>
        <description>Description:\r\n
(1) This disc is copy-protected.\r\n
(2) Try again with a non-protected disc.</description>
    </eE0FF004E>
    <eE0FF004F>
        <name>BURNER_E_KERNEL_OBJ</name>
        <title>A Windows kernel object error occurred.</title>
        <reference>() Failed to create or release Windows kernel objects (e.\r\ng.\r\n Event, Thread, Mutex, Semaphore, etc).\r\n</reference><description>Description:\r\n
(1) An error occurred when trying to use a core resource of the operating system.</description>
    </eE0FF004F>
    <eE0FF0050>
        <name>BURNER_E_HW_GET_DRIVE_INFO</name>
        <title></title><reference></reference><description>Description:\r\n
(1) An error occurred when trying to obtain drive-related information.</description>
    </eE0FF0050>
    <eE0FF0051>
        <name>BURNER_E_HW_GET_DRIVE_HANDLE</name>
        <title>A drive handle error occurred.</title>
        <reference>() An error occurred when trying to obtain the drive handle.\r\n</reference>
        <description>Description:\r\n
(1) An error occurred in the internal structure of the program.\r\n
(2) Try again with a different drive if you have one.\r\n
(3) Verify that the selected drive is properly connected to your computer.\r\n
(4) Restart the program, then try again.\r\n
(5) Restart your computer, then try again.</description>
    </eE0FF0051>
    <eE0FF0052>
        <name>BURNER_E_SDK_NOT_DEINIT</name>
        <title>An error occurred when de-initializing the burning engine.</title>
        <reference>() The implemented SDK is not de-initialized yet.\r\n
() Failed to de-initialize the SDK.\r\n</reference>
        <description>Description:\r\n
(1) An error occurred unloading a program component.\r\n
(2) Restart the program, then try again.\r\n
(3) Restart your computer, then try again.</description>
    </eE0FF0052>
    <eE0FF0053>
        <name>BURNER_E_FS_GET_INFO</name>
        <title>A file system error occurred.</title><reference></reference>
        <description>Description:\r\n
(1) An error occurred when obtaining information related to files or directories in the file system.\r\n
(2) An error occurred when obtaining file system-related information.\r\n
(3) Try again with different files or folders.\r\n
(4) Restart the program, then try again.\r\n
(5) Restart your computer, then try again.\r\n
(6) Close any other disc playback or recording software, then try again.\r\n
(7) Close any other programs that are running, then try again.\r\n
(8) Uninstall any other disc recording software from your computer, then try again.\r\n
(9) Uninstall and then re-install the program, then try again.</description>
    </eE0FF0053>
    <eE0FF0054>
        <name>BURNER_E_FS_SET_INFO</name>
        <title>A burning engine error occurred.</title><reference></reference>
        <description>Description:\r\n
(1) An error occurred when setting information related to files or directories in the file system.\r\n
(2) An error occurred when setting file system-related information.\r\n
(3) Try again with different files or folders.\r\n
(4) Restart the program, then try again.\r\n
(5) Restart your computer, then try again.\r\n
(6) Close any other disc playback or recording software, then try again.\r\n
(7) Close any other programs that are running, then try again.\r\n
(8) Uninstall any other disc recording software from your computer, then try again.\r\n
(9) Uninstall and then re-install the program, then try again.</description>
    </eE0FF0054>
    <eE0FF0055>
        <name>BURNER_E_FS_UPDATE</name>
        <title>An error occurred when updating the file system.</title><reference></reference>
        <description>Description:\r\n
(1) An error occurred when writing or updating the file system.\r\n
(2) Try again with different files or folders.\r\n
(3) Try again with a different disc.\r\n
(4) Try again with a different drive if you have one.\r\n
(5) Verify that the selected drive is properly connected to your computer.\r\n
(6) Restart the program, then try again.\r\n
(7) Restart your computer, then try again.\r\n
(8) Close any other disc playback or recording software, then try again.\r\n
(9) Close any other programs that are running, then try again.\r\n
(10) Uninstall any other disc recording software from your computer, then try again.\r\n
(11) Uninstall and then re-install the program, then try again.</description>
    </eE0FF0055>
    <eE0FF0056>
        <name>BURNER_E_HW_GET_DISC_INFO</name>
        <title>A disc information error occurred.</title><reference></reference>
        <description>Description:\r\n
(1) An error occurred when trying to obtain disc information.\r\n
(2) Make sure the disc is properly placed in the drive tray.\r\n
(3) Try again with a different disc.\r\n
(4) Try again with a different drive if you have one.\r\n
(5) Verify that the selected drive is properly connected to your computer.\r\n
(6) Restart the program, then try again.\r\n
(7) Restart your computer, then try again.\r\n
(8) Close any other disc playback or recording software, then try again.\r\n
(9) Close any other programs that are running, then try again.\r\n
(10) Uninstall any other disc recording software from your computer, then try again.\r\n
(11) Uninstall and then re-install the program, then try again.</description>
    </eE0FF0056>
    <eE0FF0057>
        <name>BURNER_E_HW</name>
        <title>An error in the program's disc burning engine occurred.</title><reference></reference>
        <description>Description:\r\n
(1) Make sure the disc is properly placed in the drive tray.\r\n
(2) Try again with a different disc.\r\n
(3) Try again with a different drive if you have one.\r\n
(4) Verify that the selected drive is properly connected to your computer.\r\n
(5) Restart the program, then try again.\r\n
(6) Restart your computer, then try again.\r\n
(7) Close any other disc playback or recording software, then try again.\r\n
(8) Close any other programs that are running, then try again.\r\n
(9) Uninstall any other disc recording software from your computer, then try again.\r\n
(10) Uninstall and then re-install the program, then try again.</description>
    </eE0FF0057>
    <eE0FF0058>
        <name>BURNER_E_HW_FORMAT_DISC</name>
        <title>An error occurred when formatting the disc.</title><reference></reference><description>Description:\r\n
(1) Make sure the disc is properly placed in the drive tray.\r\n
(2) Try again with a different disc.\r\n
(3) Try again with a different drive if you have one.\r\n
(4) Verify that the selected drive is properly connected to your computer.\r\n
(5) Restart the program, then try again.\r\n
(6) Restart your computer, then try again.\r\n
(7) Close any other disc playback or recording software, then try again.\r\n
(8) Close any other programs that are running, then try again.\r\n
(9) Uninstall any other disc recording software from your computer, then try again.\r\n
(10) Uninstall and then re-install the program, then try again.</description>
    </eE0FF0058>
    <eE0FF0059>
        <name>BURNER_E_HW_SETTING</name>
        <title>A burning engine error occurred.</title>
        <reference>() An error occurred when setting some parameters to the Hardware Control Manager.\r\n</reference>
        <description>Description:\r\n
(1) Make sure the disc is properly placed in the drive tray.\r\n
(2) Try again with a different disc.\r\n
(3) Try again with a different drive if you have one.\r\n
(4) Verify that the selected drive is properly connected to your computer.\r\n
(5) Restart the program, then try again.\r\n
(6) Restart your computer, then try again.\r\n
(7) Close any other disc playback or recording software, then try again.\r\n
(8) Close any other programs that are running, then try again.\r\n
(9) Uninstall any other disc recording software from your computer, then try again.\r\n
(10) Uninstall and then re-install the program, then try again.</description>
    </eE0FF0059>
    <eE0FF005A>
        <name>BURNER_E_FS</name>
        <title>A file system error occurred.</title>
        <reference>() An error occurred in the HONOJI module.\r\n</reference>
        <description>Description:\r\n
(1) An error occurred when writing or updating the file system.\r\n
(2) Try again with different files or folders.\r\n
(3) Try again with a different disc.\r\n
(4) Try again with a different drive if you have one.\r\n
(5) Verify that the selected drive is properly connected to your computer.\r\n
(6) Restart the program, then try again.\r\n
(7) Restart your computer, then try again.\r\n
(8) Close any other disc playback or recording software, then try again.\r\n
(9) Close any other programs that are running, then try again.\r\n
(10) Uninstall any other disc recording software from your computer, then try again.\r\n
(11) Uninstall and then re-install the program, then try again.</description>
    </eE0FF005A>
    <eE0FF005C>
        <name>BURNER_E_BEGIN_READ_WRITE</name>
        <title>An error occurred while the burning engine was reading.</title>
        <reference>() The client did not call BeginRead() or BeginWrite() before using Read() or Write().\r\n
() The client tried to call EndRead() without calling BeginRead().\r\n</reference>
        <description>Description:\r\n
(1) Make sure the disc is properly placed in the drive tray.\r\n
(2) Try again with a different disc.\r\n
(3) Try again with a different drive if you have one.\r\n
(4) Verify that the selected drive is properly connected to your computer.\r\n
(5) Restart the program, then try again.\r\n
(6) Restart your computer, then try again.\r\n
(7) Close any other disc playback or recording software, then try again.\r\n
(8) Close any other programs that are running, then try again.\r\n
(9) Uninstall any other disc recording software from your computer, then try again.\r\n
(10) Uninstall and then re-install the program, then try again.</description>
    </eE0FF005C>
    <eE0FF005D>
        <name>BURNER_E_ACCESS_RIGHT</name>
        <title>A registry error occurred.</title>
        <reference>() The current user does not have access rights to the registry key.\r\n</reference>
        <description>Description:\r\n
(1) An error occurred when trying to use a core resource of the operating system.\r\n
(2) Restart the program, then try again.\r\n
(3) Restart your computer, then try again.\r\n
(4) Close any other disc playback or recording software, then try again.\r\n
(5) Close any other programs that are running, then try again.\r\n
(6) Uninstall any other disc recording software from your computer, then try again.\r\n
(7) Uninstall and then re-install the program, then try again.\r\n
(8) Make sure your computer meets the minimum system requirements for this application.</description>
    </eE0FF005D>
    <eE0FF005E>
        <name>BURNER_E_FILENAME</name>
        <title>A filename error occurred.</title>
        <reference>() The length of the file path, file name, extension name is invalid.\r\n</reference>
        <description>Description:\r\n
(1) Some or all of the names (including the paths and the filenames) of the source files are too long.\r\n
(2) Try again with files that have shorter path names.\r\n
(3) Try again with different files or folders.</description>
    </eE0FF005E>
    <eE0FF005F>
        <name>BURNER_E_MULTISESSION_DISC</name>
        <title>A multisession disc error occurred.</title><reference></reference>
        <description>Description:\r\n
(1) The disc from which the program attempted to import a session is not a multisession disc.</description>
    </eE0FF005F>
    <eE0FF0060>
        <name>BURNER_E_COM_INITIALIZATION</name>
        <title>A COM error occurred.</title>
        <reference>() Unable to initialize a required COM module.\r\n</reference>
        <description>Description:\r\n
(1) An error occurred when trying to use a core resource of the operating system.\r\n
(2) Try again with a different drive if you have one.\r\n
(3) Verify that the selected drive is properly connected to your computer.\r\n
(4) Restart the program, then try again.\r\n
(5) Restart your computer, then try again.\r\n
(6) Close any other disc playback or recording software, then try again.\r\n
(7) Close any other programs that are running, then try again.\r\n
(8) Uninstall any other disc recording software from your computer, then try again.\r\n
(9) Uninstall and then re-install the program, then try again.</description>
    </eE0FF0060>
    <eE0FF0061>
        <name>BURNER_E_AUDIO_TRK_WRITING_INIT</name>
        <title>An error occurred when burning an Audio CD.</title><reference></reference>
        <description>Description:\r\n
(1) Tried to write a track before calling 'StartAudioBurning'.\r\n
(2) Called 'EndAudioBurning' before 'StartAudioBurning'.\r\n
(3) Called 'StartAudioBurning' before calling 'EndAudioBurning' on last disc written.</description>
    </eE0FF0061>
    <eE0FF0062>
        <name>BURNER_E_INVALID_AUDIO_FORMAT</name>
        <title>An invalid audio format was detected.</title><reference></reference>
        <description>Description:\r\n
(1) The current track is not a valid audio format.\r\n
(2) Try again with a different audio file.\r\n
</description>
    </eE0FF0062>
    <eE0FF0063>
        <name>BURNER_E_INVALID_AUDIO_STREAM</name>
        <title>An invalid audio stream was detected.</title>
        <reference>() Corrupt audio file.\r\n</reference>
        <description>Description:\r\n
(1) Try again with a different audio file.</description>
    </eE0FF0063>
    <eE0FF0064>
        <name>BURNER_E_GET_VOLUME_LABEL</name>
        <title>An error occurred when reading the disc's volume label.</title>
        <reference>() An error occurred when trying to obtain the disc volume label.\r\n</reference>
        <description>Description:\r\n
(1) Make sure the disc is properly placed in the drive tray.\r\n
(2) Try again with a different disc.\r\n
(3) Try again with a different drive if you have one.\r\n
(4) Verify that the selected drive is properly connected to your computer.\r\n
(5) Restart the program, then try again.\r\n
(6) Restart your computer, then try again.\r\n
(7) Close any other disc playback or recording software, then try again.\r\n
(8) Close any other programs that are running, then try again.\r\n
(9) Uninstall any other disc recording software from your computer, then try again.\r\n
(10) Uninstall and then re-install the program, then try again.</description>
    </eE0FF0064>
    <eE0FF0065>
        <name>BURNER_E_FILENAME_CHARSET</name>
        <title>A filename error occurred.</title>
        <reference>() The file name or extension contains invalid characters.\r\n</reference>
        <description>Description:\r\n
(1) Some or all of the names (including the paths and the filenames) of the source files contain unacceptable characters.\r\n
(2) Try again with different files or folders.\r\n
(3) Try again with filenames in English or using characters that match your operating system's default language.</description>
    </eE0FF0065>
    <eE0FF0066>
        <name>BURNER_E_VERIFY</name>
        <title>A disc verification error occurred.</title><reference></reference>
        <description>Description:\r\n
(1) An error occurred when verifying the disc after it was burned successfully.\r\n
(2) Verify that the disc content is visible in Windows Explorer and that it can be accessed or played as expected.</description>
    </eE0FF0066>
    <eE0FF0067>
        <name>BURNER_E_COMPARE</name>
        <title>A disc data comparison error occurred.</title><reference></reference>
        <description>Description:\r\n
(1) An error occurred when comparing data on the disc with source data after burning successfully.\r\n
(2) Verify that the disc content is visible in Windows Explorer and that it can be accessed or played as expected.</description>
    </eE0FF0067>
    <eE0FF0068>
        <name>BURNER_E_INVALID_OPERATION</name>
        <title>An invalid operation was attempted.</title>
        <reference>() The drive is not a recorder but the client attempted to erase the disc.\r\n
() The drive does not support DDCD but the client attempted to verify whether the inserted disc is a DDCD or not.\r\n
() The client attempted to use a function that is not supported by the drive.\r\n</reference>
        <description>Description:\r\n
(1) A drive error occurred.\r\n
(2) Try again with a different drive if you have one.\r\n
(3) Verify that the selected drive is properly connected to your computer.\r\n
(4) Restart the program, then try again.\r\n
(5) Restart your computer, then try again.\r\n
(6) Close any other disc playback or recording software, then try again.\r\n
(7) Close any other programs that are running, then try again.\r\n
(8) Uninstall any other disc recording software from your computer, then try again.\r\n
(9) Uninstall and then re-install the program, then try again.</description>
    </eE0FF0068>
    <eE0FF0069>
        <name>BURNER_E_OVER_TRACK</name>
        <title>An error occurred when burning a track.</title><reference></reference>
        <description>Description:\r\n
(1) An error occurred writing too many tracks.\r\n
(2) Try again with fewer selected files.</description>
    </eE0FF0069>
    <eE0FF006A>
        <name>BURNER_E_FILE_IO</name>
        <title> A file error occurred.</title>
        <reference>() An error occurred when performing file input or output.\r\n</reference>
        <description>Description:\r\n
(1) An error occurred when trying to use a core resource of the operating system.\r\n
(2) Try again with different files or folders.\r\n
(3) Restart the program, then try again.\r\n
(4) Restart your computer, then try again.\r\n
(5) Close any other disc playback or recording software, then try again.\r\n
(6) Close any other programs that are running, then try again.\r\n
(7) Uninstall any other disc recording software from your computer, then try again.\r\n
(8) Uninstall and then re-install the program, then try again.</description>
    </eE0FF006A>
    <eE0FF006B>
        <name>BURNER_E_INVALID_ISRC</name>
        <title>An invalid ISRC was detected.</title>
        <reference>() The ISRC set by the client is invalid.\r\n</reference>
        <description>Description:\r\n
(1) Make sure the disc is properly placed in the drive tray.\r\n
(2) Try again with a different disc.\r\n
(3) Try again with a different drive if you have one.\r\n
(4) Verify that the selected drive is properly connected to your computer.\r\n
(5) Restart the program, then try again.\r\n
(6) Restart your computer, then try again.\r\n
(7) Close any other disc playback or recording software, then try again.\r\n
(8) Close any other programs that are running, then try again.\r\n
(9) Uninstall any other disc recording software from your computer, then try again.\r\n
(10) Uninstall and then re-install the program, then try again.</description>
    </eE0FF006B>
    <eE0FF006C>
        <name>BURNER_E_INVALID_CATALOG</name>
        <title>An Audio CD error occurred.</title>
        <reference>() An error occurred when setting the catalog before burning an Audio CD.\r\n</reference>
        <description>Description:\r\n
(1) Make sure the disc is properly placed in the drive tray.\r\n
(2) Try again with a different disc.\r\n
(3) Try again with a different drive if you have one.\r\n
(4) Verify that the selected drive is properly connected to your computer.\r\n
(5) Restart the program, then try again.\r\n
(6) Restart your computer, then try again.\r\n
(7) Close any other disc playback or recording software, then try again.\r\n
(8) Close any other programs that are running, then try again.\r\n
(9) Uninstall any other disc recording software from your computer, then try again.\r\n
(10) Uninstall and then re-install the program, then try again.</description>
    </eE0FF006C>
    <eE0FF006D>
        <name>BURNER_E_SET_CDTEXT</name>
        <title>A CD Text error occurred.</title>
        <reference></reference><description>Description:\r\n
(1) An error occurred when setting CD Text before burning an Audio CD.\r\n
(2) Please determine if your drive supports reading or writing CD text information.\r\n
(3) Make sure the disc is properly placed in the drive tray.\r\n
(4) Try again with a different disc.\r\n
(5) Try again with a different drive if you have one.\r\n
(6) Verify that the selected drive is properly connected to your computer.\r\n
(7) Restart the program, then try again.\r\n
(8) Restart your computer, then try again.</description>
    </eE0FF006D>
    <eE0FF006E>
        <name>BURNER_E_GET_CDTEXT</name>
        <title>A CD Text error occurred.</title><reference></reference><description>Description:\r\n
(1) An error occurred when obtaining CD Text information.\r\n
(2) Please determine if your drive supports reading or writing CD text information.\r\n
(3) Make sure the disc is properly placed in the drive tray.\r\n
(4) Try again with a different disc.\r\n
(5) Try again with a different drive if you have one.\r\n
(6) Verify that the selected drive is properly connected to your computer.\r\n
(7) Restart the program, then try again.\r\n
(8) Restart your computer, then try again.</description>
    </eE0FF006E>
    <eE0FF006F>
        <name>BURNER_E_INVALID_TRACK_TYPE</name>
        <title>An error occurred when burning a track.</title>
        <reference>() Burning a combination of track types is illegal.\r\n</reference>
        <description>Description:\r\n
(1) An error occurred in the internal structure of the program.\r\n
(2) Try again with only files of the same format.</description>
    </eE0FF006F>
    <eE0FF0070>
        <name>BURNER_E_INVALID_PATH</name>
        <title>A file path error occurred.</title>
        <reference>() The node that the client tried to delete does not exist.\r\n</reference>
        <description>Description:\r\n
(1) An error occurred when trying to use a core resource of the operating system.\r\n
(2) Try again with different files or folders.\r\n
(3) Restart the program, then try again.\r\n
(4) Restart your computer, then try again.\r\n
(5) Close any other disc playback or recording software, then try again.\r\n
(6) Close any other programs that are running, then try again.\r\n
(7) Uninstall any other disc recording software from your computer, then try again.\r\n
(8) Uninstall and then re-install the program, then try again.</description>
    </eE0FF0070>

<!-- HwCtrlMgr -->
    <eE0FD0001>
        <name>HCM_E_OPEN_FILE</name>
        <title></title><reference></reference><description>Description:\r\n
(1) Failed to open an existing file or failed to create a file.\r\n
(2) Failed to create a drive handle.\r\n
(3) Failed to open device ID using "mciSendCommand()".</description>
    </eE0FD0001>
    <eE0FD0002>
        <name>HCM_E_GET_FILE_SIZE</name>
        <title></title><reference></reference><description>An error occurred when obtaining the file's size.</description>
    </eE0FD0002>
    <eE0FD0003>
        <name>HCM_E_FUNC_CALL</name>
        <title></title><reference></reference><description>Some functions have been called incorrectly or executed unsuccessfully.</description>
    </eE0FD0003>
    <eE0FD0004>
        <name>HCM_E_OUT_OF_MEMORY</name>
        <title></title><reference></reference><description>Out of system memory.</description>
    </eE0FD0004>
    <eE0FD0005>
        <name>HCM_E_READ</name>
        <title></title><reference></reference><description>Failed to read data from files, system pipe, or disc.</description>
    </eE0FD0005>
    <eE0FD0006>
        <name>HCM_E_WRITE</name>
        <title></title><reference></reference><description>Writing data to the file or to the system pipe.</description>
    </eE0FD0006>
    <eE0FD0007>
        <name>HCM_E_SYSTEM_VER</name>
        <title></title><reference></reference><description>Failed to obtain Windows version.</description>
    </eE0FD0007>
    <eE0FD0008>
        <name>HCM_E_SYS_REGISTRY</name>
        <title></title><reference></reference><description>An error occurred when opening or creating or querying the registry key value.</description>
    </eE0FD0008>
    <eE0FD0009>
        <name>HCM_E_NULL_STR</name>
        <title></title><reference></reference><description>The string used is a null string.</description>
    </eE0FD0009>
    <eE0FD000A>
        <name>Description:\r\n
(1) Incorrect writing handle.\r\n
(2) Failed to obtain module handle.\r\n
(3) Failed to close handle.\r\n</name>
        <title></title><reference></reference><description></description>
    </eE0FD000A>
    <eE0FD000B>
        <name>HCM_E_OVER_SIZE</name>
        <title></title><reference></reference><description>Description:\r\n
(1) The total size of the source data is larger than the free space of the inserted disc or hard drive.\r\n
(2) When creating a VCD/SVCD, the total size of the files in the Segment Play Item Area exceeds the size limit of 297000 sectors.\r\n
(3) The size of the input buffer is insufficient to contain the retrieved data to output.</description>
    </eE0FD000B>
    <eE0FD000C>
        <name>HCM_E_FIND</name>
        <title></title><reference></reference><description>Description:\r\n
(1) Failed to find file in the directory currently being searched.\r\n
(2) Unable to locate desired registry key.</description>
    </eE0FD000C>
    <eE0FD000D>
        <name>HCM_E_DIR</name>
        <title></title><reference></reference><description>Description:\r\n
(1) Failed to obtain or set the current directory.\r\n
(2) Failed to obtain the Windows installed directory.\r\n
(3) Failed to create directory.</description>
    </eE0FD000D>
    <eE0FD000E>
        <name>HCM_E_COPY</name>
        <title></title><reference></reference><description>An error occurred when copying a string, file, or folder.</description>
    </eE0FD000E>
    <eE0FD000F>
        <name>HCM_E_ATTRIB</name>
        <title></title><reference></reference><description>Failed to modify the file's attribute.</description>
    </eE0FD000F>
    <eE0FD0010>
        <name>HCM_E_DEL</name>
        <title></title><reference></reference><description>An error occurred when deleting a string, file, or folder.</description>
    </eE0FD0010>
    <eE0FD0011>
        <name>HCM_E_LOAD_DLL</name>
        <title></title><reference></reference><description>Failed to load DLL files.\r\n </description>
    </eE0FD0011>
    <eE0FD0012>
        <name>HCM_E_FREE_DLL</name>
        <title></title><reference></reference><description>Failed to release the loaded DLL files.</description>
    </eE0FD0012>
    <eE0FD0013>
        <name>HCM_E_REBOOT</name>
        <title></title><reference></reference><description>The data "asapi" for the registry value "UpperFilters" was not found.\r\n The burning engine has added this data.</description>
    </eE0FD0013>
    <eE0FD0014>
        <name>HCM_E_GET_PROC_ADDR</name>
        <title></title><reference></reference><description>Failed to obtain the procedure's addresses.</description>
    </eE0FD0014>
    <eE0FD0015>
        <name>HCM_E_KERNEL_OBJ</name>
        <title></title><reference></reference><description>Failed to create or release Win32 Kernel Objects (e.\r\ng.\r\n Event, Thread, Mutex, Semaphore, etc).</description>
    </eE0FD0015>
    <eE0FD0016>
        <name>HCM_E_WAIT_FUNC</name>
        <title></title><reference></reference><description>Waiting Windows SDK functions failed.</description>
    </eE0FD0016>
    <eE0FD0017>
        <name>HCM_E_ASPI_MGR</name>
        <title></title><reference></reference><description>The ASPI Manager returned an error when executing commands.</description>
    </eE0FD0017>
    <eE0FD0018>
        <name>HCM_E_NOT_READY</name>
        <title></title><reference></reference><description>Description:\r\n
(1) The selected drive is not ready.\r\n
(2) There is no disc in the selected drive.</description>
    </eE0FD0018>
    <eE0FD0019>
        <name>HCM_E_COPY_PROTECT</name>
        <title></title><reference></reference><description>Description:\r\n
(1) This disc is copy-protected.\r\n
(2) Authentication failure.\r\n
(3) The authentication key is not present.\r\n
(4) The authentication key is not established.</description>
    </eE0FD0019>
    <eE0FD001A>
        <name>HCM_E_REGION_CODE</name>
        <title></title><reference></reference><description>Description:\r\n
(1) Media region code mismatch.\r\n
(2) Region reset error.</description>
    </eE0FD001A>
    <eE0FD001B>
        <name>HCM_E_TIMEOUT</name>
        <title></title><reference></reference><description>The command has timed out.</description>
    </eE0FD001B>
    <eE0FD001C>
        <name>HCM_E_NOT_INIT</name>
        <title></title><reference></reference><description>Description:\r\n
(1) The device I/O control layer is not initialized yet.\r\n
(2) The drive command layer is not initialized yet.</description>
    </eE0FD001C>
    <eE0FD001D>
        <name>HCM_E_NTDIO</name>
        <title></title><reference></reference><description>The DeviceIOControl() function failed after retrying several times.</description>
    </eE0FD001D>
    <eE0FD001E>
        <name>HCM_E_FUNC_PARA</name>
        <title></title><reference></reference><description>Description:\r\n
(1) The parameters for calling a function or selecting an option are incorrect.\r\n
(2) The index for array accessing or drive selection is out of range.</description>
    </eE0FD001E>
    <eE0FD001F>
        <name>HCM_E_MEMORY</name>
        <title></title><reference></reference><description>The memory cannot read/write.</description>
    </eE0FD001F>
    <eE0FD0020>
        <name>HCM_E_NOT_IMPL</name>
        <title></title><reference></reference><description>Description:\r\n
(1) This function is not implemented yet.\r\n
(2) This function is not supported under the current version of Windows.</description>
    </eE0FD0020>
    <eE0FD0021>
        <name>HCM_E_MEDIA_NOT_PRESENT</name>
        <title></title><reference></reference><description>There is no medium in the selected drive.</description>
    </eE0FD0021>
    <eE0FD0022>
        <name>HCM_E_BAD_MEDIA</name>
        <title></title><reference></reference><description>Description:\r\n
(1) There is an error with the inserted medium: possibly an incompatible medium, an unknown or incompatible format, or the medium may be upside down).\r\n
(2) The inserted disc is not erasable.</description>
    </eE0FD0022>
    <eE0FD0023>
        <name>HCM_E_IN_PROGRESS</name>
        <title></title><reference></reference><description>Some operations are still in progress.</description>
    </eE0FD0023>
    <eE0FD0024>
        <name>HCM_E_CAST</name>
        <title></title><reference></reference><description>An operation such as "dynamic_cast" or "static_cast" failed.</description>
    </eE0FD0024>
    <eE0FD0025>
        <name>HCM_E_EOF</name>
        <title></title><reference></reference><description>End of file.</description>
    </eE0FD0025>
    <eE0FD0026>
        <name>HCM_E_SEEK</name>
        <title></title><reference></reference><description>Failed to move file's pointer.</description>
    </eE0FD0026>
    <eE0FD0027>
        <name>HCM_E_IMAGE</name>
        <title></title><reference></reference><description>Description:\r\n
(1) Image file's format (*.\r\nRIF) is not matched.\r\n
(2) Unable to find the corresponding image file list.</description>
    </eE0FD0027>
    <eE0FD0028>
        <name>HCM_E_WRITE_PROTECTED</name>
        <title></title><reference></reference><description>The disc is write-protected.\r\n.</description>
    </eE0FD0028>

<!-- Honoji -->
    <eF0F00001>
        <name>FSERR_FILEOP_NOTDIR</name>
        <title></title><reference></reference><description></description>
    </eF0F00001>
    <eF0F00002>
        <name>FSERR_FILEOP_ISDIR</name>
        <title></title><reference></reference><description></description>
    </eF0F00002>
    <eF0F00003>
        <name>FSERR_FILEOP_NOTFILE</name>
        <title></title><reference></reference><description></description>
    </eF0F00003>
    <eF0F00004>
        <name>FSERR_FILEOP_ISFILE</name>
        <title></title><reference></reference><description></description>
    </eF0F00004>
    <eF0F00005>
        <name>FSERR_FILEOP_SEEKEOF</name>
        <title></title><reference></reference><description></description>
    </eF0F00005>
    <eF0F00006>
        <name>FSERR_FILEOP_SEEKNEGATIVE</name>
        <title></title><reference></reference><description></description>
    </eF0F00006>
    <eF0F00007>
        <name>FSERR_FILEOP_NOTEXISTED</name>
        <title></title><reference></reference><description></description>
    </eF0F00007>
    <eF0F00008>
        <name>FSERR_FILEOP_EXISTED</name>
        <title></title><reference></reference><description></description>
    </eF0F00008>
    <eF0F00009>
        <name>FSERR_FILEOP_PARENTNOTEXISTED</name>
        <title></title><reference></reference><description></description>
    </eF0F00009>
    <eF0F0000A>
        <name>FSERR_FILEOP_SETEOF</name>
        <title></title><reference></reference><description></description>
    </eF0F0000A>
    <eF0F0000B>
        <name>FSERR_FILEOP_SETNEGATIVE</name>
        <title></title><reference></reference><description></description>
    </eF0F0000B>
    <eF0F0000C>
        <name>FSERR_FILEOP_ILLEGALRANGE</name>
        <title></title><reference></reference><description></description>
    </eF0F0000C>
    <eF0F0000D>
        <name>FSERR_FILEOP_INVALIDPARAMS</name>
        <title></title><reference></reference><description></description>
    </eF0F0000D>
    <eF0F0000E>
        <name>FSERR_FILEOP_OPENED</name>
        <title></title><reference></reference><description></description>
    </eF0F0000E>
    <eF0F0000F>
        <name>FSERR_FILEOP_FINDNOTFOUND</name>
        <title></title><reference></reference><description></description>
    </eF0F0000F>
    <eF0F00010>
        <name>FSERR_FILEOP_FINDINVALID</name>
        <title></title><reference></reference><description></description>
    </eF0F00010>
    <eF0F00011>
        <name>FSERR_FILEOP_FINDNOMORE</name>
        <title></title><reference></reference><description></description>
    </eF0F00011>
    <eF0F00012>
        <name>FSERR_FILEOP_INVALIDFILE</name>
        <title></title><reference></reference><description></description>
    </eF0F00012>
    <eF0F10001>
        <name>FSERR_FSUPDATE_GENDESCFAILED</name>
        <title></title><reference></reference><description></description>
    </eF0F10001>
    <eF0F10002>
        <name>FSERR_FSUPDATE_GENDESCFAILED</name>
        <title></title><reference></reference><description></description>
    </eF0F10002>
    <eF0F10003>
        <name>FSERR_FSUPDATE_GENIMGFAILED</name>
        <title></title><reference></reference><description></description>
    </eF0F10003>
    <eF0F10004>
        <name>FSERR_FSUPDATE_GENIMGREADFAILED</name>
        <title></title><reference></reference><description></description>
    </eF0F10004>
    <eF0F10005>
        <name>FSERR_FSUPDATE_NOREADFUNC</name>
        <title></title><reference></reference><description></description>
    </eF0F10005>
    <eF0F20001>
        <name>FSERR_LOAD_NOREADDISCFUNC</name>
        <title></title><reference></reference><description></description>
    </eF0F20001>
    <eF0F20101>
        <name>FSERR_LOAD_AVDPERROR</name>
        <title></title><reference></reference><description></description>
    </eF0F20101>
    <eF0F20102>
        <name>FSERR_LOAD_MVDSERROR</name>
        <title></title><reference></reference><description></description>
    </eF0F20102>
    <eF0F20103>
        <name>FSERR_LOAD_FSDERROR</name>
        <title></title><reference></reference><description></description>
    </eF0F20103>
    <eF0F30001>
        <name>FSERR_GENERAL_NOTIMPL</name>
        <title></title><reference></reference><description></description>
    </eF0F30001>
    <eF0F30002>
        <name>FSERR_GENERAL_OPNOTALLOWED</name>
        <title></title><reference></reference><description></description>
    </eF0F30002>
    <eF0F40001>
        <name>FSERR_FAT_HOLENOTFOUND</name>
        <title></title><reference></reference><description></description>
    </eF0F40001>
    <eF0F40002>
        <name>FSERR_FAT_NEEDREGISTER</name>
        <title></title><reference></reference><description></description>
    </eF0F40002>

</root>